Air Cooled Servo Controlled Voltage Stabilizer
Our clients can avail from us a comprehensive array of Air Cooled Servo Controlled Voltage Stabilizer. Our product gamut is extensively used in laboratories and industries where consistent voltage supply is necessary to avoid damage to equipment and instrument. These products are used for single phase as well as three phase applications with minimum variation. Minimum variation in single phase starts from 90V-265V in the lower side & 220V-290V on the higher side and in 3Phase starting from 160V-500V in the lower side and 380V-500V on the higher side.
Technical Specification of Servo Controlled Voltage Stabilizer:
Wide variation of input voltage range starting from90V-265V in the lower side & 220V-290V on the higher side for single phase stabilizer & 160V-500V in the lower side and 380V-500V on the higher side for 3Phase variety as per customers specification.
The output Voltage can be set anywhere between 220V-240V in Single Phase and 380V-440V in Three Phase.
± 1 %
Balanced/Unbalanced ( Individual phase correction).
Automatic / Manual.
Voltmeter on each phase and Voltmeter and Amp meter to indicate Output Line Voltage and Output Current with the help of selector switch.
47 Hz to 53Hz ( Sinusoidal ).
High and low voltage indicators with Audible alarm.
Output Wave Form
The Out put wave form is true replica of the input.
25V/sec for each phase.
0°c - 45°c.
Type of Cooling
Type of Motor
AC step synchronous Motor
1) A Circuit Breaker is provided at the output for over load /