Delta VFD- REG2000 (Power Regenerative Unit)

Product Description

Delta VFD- REG2000 (Power Regenerative Unit)

A traditional drive system used for inertia load work generally performs rapid deceleration, braking and positioning. When its motor is in generator mode it produces large amounts of regenerative energy that must be consumed to maintain a stable DC bus voltage and safe operation. The traditional method to solve the regenerative energy problem is to install a brake resistor. While it is easy to install and is low cost, it takes up a large amount of space and requires installing additional devices to dissipate the heat. This method provides limited efficiency and wastes the regenerative energy.

Delta's REG2000 series is capable of collecting and converting your system's regenerative energy into reusable electricity for the ultimate in energy savings. The installation process is as simple as installing a brake resistor, but with only half the size and better efficiency. The REG2000 is your best green energy solution for power regeneration.

• REG075A23A-21 - 7.5KW/10HP
• REG110A23A-21 - 11KW/15HP
• REG150A23A-21 - 15KW/20HP
• REG185A23A-21 - 18.5KW/25HP
• REG220A23A-21 - 22KW/30HP
• REG300A23A-21 - 30KW/40HP
• REG370A23A-21 - 37KW/50HP
• REG075A43A-21 - 7.5KW/10HP
• REG110A43A-21 - 11KW/15HP
• REG150A43A-21 - 15KW/20HP
• REG185A43A-21 - 18.5KW/25HP
• REG220A43A-21 - 22KW/30HP
• REG300A43A-21 - 30KW/40HP
• REG370A43A-21 - 37KW/50HP
• REG450A43A-21 - 45KW/60HP
• REG550A43A-21 - 55KW/75HP