Omron Multi-Axis Controller

About Omron Multi-Axis Controller

• CK3E-1210
• CK3E-1310
• CK3E-1410

• FZ-MEM2G
• FZ-MEM8G
• S8JX-[][][][]24[][]

• Use Straight STP (shielded twisted-pair) cable of category 5 or higher with double shielding (braiding and aluminum foil tape) for EtherCAT.
• For EtherCAT, use a shielded twisted-pair cable (double shielding with aluminum tape and braiding) of Ethernet category 5 (100BASETX) or higher, and use straight wiring.
• For Ethernet, required specification for the communications cables varies depending on the baud rate.
• For 100BASE-TX/10BASE-T, use an STP (shielded twisted-pair) cable of Ethernet category 5 or higher. You can use either a straight or cross cable.
• For 1000BASE-T, use an STP (double shielding with aluminum tape and braiding) cable of Ethernet category 5e or higher. You can use either a straight or cross cable.
• In the table, materials indicated available for Ethernet 100BASE-TX are available for both of 100BASE-TX and 10BASE-T.

• XS6W-6LSZH8SS30CM-Y
• XS6W-6LSZH8SS50CM-Y
• XS6W-6LSZH8SS100CM-Y
• XS6W-6LSZH8SS200CM-Y
• XS6W-6LSZH8SS300CM-Y
• XS6W-6LSZH8SS500CM-Y
• XS5W-T421-AMD-K
• XS5W-T421-BMD-K
• XS5W-T421-CMD-K
• XS5W-T421-DMD-K
• XS5W-T421-GMD-K
• XS5W-T421-JMD-K
• XS5W-T421-BM2-SS
• XS5W-T421-CM2-SS
• XS5W-T421-DM2-SS
• XS5W-T421-EM2-SS
• XS5W-T421-GM2-SS
• XS5W-T421-JM2-SS
• XS5W-T421-BMC-SS
• XS5W-T421-CMC-SS
• XS5W-T421-DMC-SS
• XS5W-T421-EMC-SS
• XS5W-T421-GMC-SS
• XS5W-T421-JMC-SS

Cables / Connectors

• NETSTAR-C5E SAB 0.5 × 4P *1
• KETH-SB *1
• FAE-5004 *1
• MPS588-C *1
• KETH-PSB-OMR *2
• PNET/B *2
• XS6G-T421-1 *2
• F-LINK-E 0.5mm × 4P *3
• MPS588 *3